ROTARY UNION R/RH

The RH union is most frequently used with hot water or thermal oil for heating cilinders. It is available in single and dual passage versions with rotating or stationairy syphons. This will allow for inlet and outlet of the fluid to be on the same side of the machine.

The union can be threaded or is available with flanged connections. This depends on the application and local requirements of the application.

Johnson-Fluiten suppliers different seal materials, body materials, o-rings for the different applications. Also we supply ATEX certifications for our unions on request. 

Quick Select Chart

TYPE MEDIA Pressure (Max.) Temperature (Max.)
Water Thermal Oil Steam Air BAR ° C
3/8" to 2" R         50 120
RH         50 180
RHB         25 400
21/2" to 6" R         13 120
RH         13 180
RHB         12 400

Recommended

Acceptable

Contact us for more info

Materials:

SEAL CODE SEAL MATERIALS MEDIA MAX TEMPERATURE
B3 Grafite - Silicio - Viton WATER - AIR - DRY 120"
B4 Grafite - Silicio - Aflas WATER - AIR - DRY - STEAM 180"
C3 Tungsteno - Silicio - Viton DIRTY WATER 120"
C4 Tungsteno - Silicio - Aflas DIRTY WATER 180"
T4 Bronzo - Silicio - Aflas DIATHERMIC OIL 180"
Request documentation
Insert your details and request documentation

CHARACTERISTICS

FluidPressure 
bar
Temperature 
°C
Speed 
RPM
Coolant 50 180 3000
Oil 50 180 3000

  • General Purpose Ball Bearing union
  • Size from 3/8" up to 2"
  • Single and Dual Flow configurations
  • 2 seal configuration: B3 - Clean Fluids / C3 Abbrasive Fluids
  • On-machine repairable
  • Temperature up to 120°C (248°F)
  • Max pressure 50 Barg (725 psi)
  • Max RPM 3000

MANY CONFIGURATIONS SHIPPING IN 24 H!

  • General Purpose Ball Bearing union
  • Size from 2-1/2" up to 6"
  • Single and Dual Flow configurations
  • 2 seal configuration: B3 - Clean Fluids / C3 Abbrasive Fluids
  • On-machine repairable
  • Temperature up to 120°C (248°F)
  • Max pressure 25 Barg (360 psi)
  • Max RPM 750

  • General Purpose Ball Bearing union
  • Size from 3/8" up to 2"
  • Single and Dual Flow configurations
  • Applicable for hot fluids like water (B4) and oil (T4)
  • Temperature up to 180°C (350°F)
  • Max pressure 50 Barg (725 psi)
  • Max RPM 3000

VARIOUS CONFIGURATIONS SHIPPING IN 24 H

The complete R line is featured with a Quick Replacement Design (QRD) which allow you to repair the union while it is still installed on the machine. It is enough to remove the blocking screws and separate the body to replace sealrings and orings. It is as well possible to quickly adapt the joint to fluids requiring different sealing materials.The repairkit includes stationary ring, rotating ring, O-ring gaskets and a set of springs.

SEAL CODE SEAL MATERIALS MEDIA MAX TEMPERATURE
B3 Grafite - Silicio - Viton WATER - AIR - DRY 120"
B4 Grafite - Silicio - Aflas WATER - AIR - DRY - STEAM 180"
C3 Tungsteno - Silicio - Viton DIRTY WATER 120"
C4 Tungsteno - Silicio - Aflas DIRTY WATER 180"
T4 Bronzo - Silicio - Aflas DIATHERMIC OIL 180"
Request documentation
Insert your details and request documentation